Канавочные инструменты

Find the required HORN part numbers based on individual machine types.

• Select from the drop down menu:
  • Machine Manufacturer
  • Machine Type

• Results will be:
  • Matching item number for base plate
  • Matching item numbers for tool holder

Tool system for machining smaller bores:
More than 1,200 standard inserts can be clamped in a toolholder.

• Boring out from bore diameter 0.2 mm
• Grooving from bore diameter 2 mm
• Axial grooving from diameter 5 mm
• Chamfering, profiling, backboring and threading

Tool system bolted on face side with low vibration carbide toolholders

• Boring out from bore diameter 7.8 mm
• Grooving from bore diameter 8 mm

Large selection of inserts for different applications, e.g. chamfer, full radius, thread, backboring

Tooling system for lathes, used for grooving, turning, parting off and threading

External machining:

• Cutting width 0.5 mm to 2.0 mm
• Grooving depth t_max = 6.0 mm
• Metric thread pitches P = 0,25 - 1,5 mm
• Backturning internal ap_max = 6.0 mm
• Parting off t_max = 6.0 mm

• Exceptionally fine-ground sharp cutting edges
• Screwed inserts

Geometries available for steel and brass machining

Tool system for grooving and for internal machining

• Bore diameters from 16 mm
• Cutting width from 2 mm to 3 mm
• grooving depth t_max = 3.5 mm
• Toolholders with shank diameter D = 16 mm

Tool system for grooving and for internal machining

• from bore diameter 20 mm
• Cutting width from 2 mm - 6 mm
• Grooving depth t_max = 7.5 mm
• with internal coolant supply

Tool system for grooving, internal and external machining

Internal machining:

• Bore diameters from 18 mm
• Cutting width from 0.5 to 5.3 mm
• Grooving depth up to 4.7 mm
• Toolholder 245 and the cutting insert for corner relief

External machining:

• Groove width 0.5 mm to 5.3 mm
• Grooving depth up to 4 mm

Tool system for Swiss-type lathes for grooving, longitudinal turning, parting off and threading

• External machining: Grooving width 1.5 to 3 mm
• Grooving depth up to 16 mm
• Special geometries for steel and brass machining

Tool system for grooving, turning, profiling and parting off
Internal machining:

• Bore diameters from 16 mm
• Grooving width 1.2 mm to 3.0 mm
• Grooving depth t_max = 6.3 mm

External machining:

• Cutting width 1.2 to 3.0 mm
• Grooving depth up to 10 mm

Parting off:

• Grooving width 2.0 mm to 3.0 mm
• Parting off diameter up to 50 mm

Tool system for grooving internally and externally, face grooving and for parting off
Internal machining:

• Bore diameters from 28 mm
• Grooving width from 2.0 mm to 6.0 mm
• Grooving depth t_max = 8 mm

External machining:

• Groove width 2.0 mm to 6.0 mm
• Penetration depth tmax = 18 mm

Grooving:

• Toolholder with cassette system
• Outer diameter from 47 mm to 1000 mm
• Grooving depth t_max = 14 mm

Available geometries:
.3, .5, .A, .D, .NC, .K, NC, .E, .F, .H, .L

With .3V geometry for stainless steels

• Cutting width 3 mm
• Grooving depth t_max = 18 mm

Tool system for grooving, internal and external machining, face grooving and parting off
Internal machining:

• Bore diameters from 38 mm
• Grooving width 3.0 mm to 10 mm
• Grooving depth t_max = 15 mm (depending on diameter)

External machining:

• Grooving width 2.5 mm to 10.0 mm
• Grooving depth t_max = 26 mm

Grooving:

• Holder with cassette system
• Outer diameter of 60 mm to 1000 mm
• Grooving depth t_max = 25 mm

Parting off:

• Cutting width 3 mm to 5 mm
• Penetration depth t_max = 25 mm
• Parting off diameter: max. 150 mm

Available geometries:
.3, .5, .A, .E, .F, .H, .L, .HR, .10, .20

Tool system for grooving, internal and external machining and for face grooving

Internal machining:

• Bore diameters from 70 mm
• Grooving width 4.0 mm to 10 mm
• Grooving depth t_max = 9.5 mm

External machining:

• Grooving width 2.5 mm to 10.0 mm
• Grooving depth t_max = 11 mm

Face grooving:

• From outside diameter D_min = 40 mm
• Cutting width from 3 to 10 mm
• Grooving depth t_max = 8 mm

Available geometries: .3, .10, .20

Tool system for grooving, internal and external machining, face grooving and parting

Internal machining:

• Bore diameters from 46 mm
• Cutting width up to 5.3 mm
• Grooving depth t_max = 5 mm
  (depending on diameter)

External machining:

• Grooving width 0.5 mm to 5.3 mm
• Grooving depth t_max = 8 mm

Face Grooving:

• Groove width 2 to 3 mm
• Grooving depth t_max = 3 mm
• From outside diameter D_min = 20 mm

Available geometries: .00, .V, .F, .5, .D, .C

Tool system for external grooving:

• Usable as neutral, left-hand and right-hand insert
• No additional clamping elements necessary
• Screw head does not generate interference contour
• Cutting widths: 2 mm / 2.5 mm / 3 mm
• Cutting depths up to 6.5 mm

Available in geometries .3, .5, .D

Tool system for grooving for internal and external machining

Internal machining:

• Bore diameters from 43 mm
• Grooving width 0.5 mm to 5.29 mm

External machining:

• Grooving width 0.5 mm to 8.0 mm
• Grooving depth t_max = 5.0 mm

Threading of:

• Trapezoidal threads
• Metric coarse threads
• Metric fine threads

Face grooving:

• Cutting width: 2.0 mm to 3.0 mm
• Grooving depth t_max = 3.0 mm
• From outside diameter D_min = 20 mm

Form stitches:

• Cutting widths up to 15 mm

Tool system for grooving and external machining

External machining:

• Grooving width 2.0 mm to 3.0 mm
• Grooving depth t_max = 8.0 mm

Available geometries: .52, .EN2 and .FY

Face grooving system with round shanks and cassettes for the common cassette interface K220, suitable for all corresponding HORN toolholders.

Internal coolant to the cutting point for efficient cooling. The .10. geometric shape ensures reliable chip flow.

• One- and two-edged inserts
• Outer diameter of 15 mm
• Cutting depths up to 20 mm
• Cutting widths from 2 to 4 mm

Individual solutions for Swiss-type lathes.

Matched connections for the following machines:

• Star
• Tornos
• Citizen

Mounting system with cassette for the following connections:

• HORN polygon shank according to ISO 26623
• HORN tool holder according to TS ISO 26622
• HORN HSK according to DIN 69893
• HORN HSKT according to DIN 12164

Cassettes solutions for the following systems:

• S100
• S224
• S229
• 312
• 315

Cassettes for face grooving:

• S224
• S229

Face grooving with the following systems:

• 105/110
• 114
• 312
• 315
• S224
• S229

Starting from outer groove diameter of 5 mm

External machining preferably on multi-spindle

• Profiling grooving inserts with a width of 10 to 45 mm
• Thread depth up to 13 mm
• Inserts with customized profile according to customer specification
• Toolholder for AWN or PWP system available

• Large selection of parting off solutions
  starting with cutting width 0.5 mm

• Toolholder systems with DIN shanks and blades for the following insert systems:
  
  • S274
  • S264
  • 312 / S312
  • S316
  • 123/223
  • 224
  • 229 / S229
  • S100

• Solid carbide blades for grooving and parting off on lathes

Manufacture of longitudinal grooves according to DIN 138 and DIN 6885 on CNC lathes and machining centers

• Grooving width from 2 mm
• Tolerance classes:
  • C11
  • JS9
  • P9

For direct mounting in the machine as well as mounting in a live broaching attachment from the companies BENZ, EMS, Schwarzer, Ar2P and WTO